China high quality Worm Screw Jack Lift Gearbox Gearbox Motor Engine Worm Gear Screw Jack Lifter Swl Mechanical Jack

Product Description

 

Top Quality Worm Gear Screw Jacks Load Up to 200 Ton

Machine& Ball Screw Jack Actuators

Features:

1. Suitable for heavy load, low speed and low frequency; 2. Main components: precision trapezoid screw pair and high precision worm gear pair; 3. Compact design, small volume, light weight, wide drive sources, low noise, easy operation, convenient maintenance. 4. The trapezoid screw has self-locking function, it can hold up load without braking device when screw stops traveling. 5. The lifting height can be adjusted according to customer requirements. 6. Widely applied in industries such as machinery, metellurgy, construction and hydraulic equipment. 7. Top End: top plate, clevis end, threaded end, plain end

How to choose a suitable model?

Some questions can help you to choose.

Q1:Do you need screw jack of ball screw or trapezoidal screw?

Q2: How many Kg or Tons the screw jack need to lift or drop? The screw shaft length? How fast the lifting speed is ? Q3:Which the screw top?you need,as picture above?

Q4:Manual type (Hand wheel?driven) or electric motor driven type or both driven type?

 

Q5:Traveling screw (screw travelling up and down when working) or traveling nut ? (the nut travelling up and down when working),Upright or?Inverted?

Product Parameters

Type

Model

Screw thread size

Max
lifting strength
kN

Max
pull force
kN

Weight without stroke
kg

Screw weight
per 100mm

SWL

Screw jack

SWL2.5

Tr30*6

25

25

7.3

0.45

SWL5

Tr40*7

50

50

16.2

0.82

SWL10/15

Tr58*12

100/150

99

25

1.67

SWL20

Tr65*12

200

166

36

2.15

SWL25

Tr90*16

250

250

70.5

4.15

SWL35

Tr100*18

350

350

87

5.20

SWL50

Tr120*20

500

500

420

7.45

SWL100

Tr160*23

1000

1000

1571

13.6

SWL120

Tr180*25

1200

1200

1350

17.3

1.Compact structure,Small size.Easy mounting,varied types.  Can be applied in 1 unit or multiple units.

2.High reliability.Long service life; With the function of   ascending,descending,thrusting,overturning

3.Wide motivity.It can be drived by  electrical motor and manual force.

4.It is usually used in low speed situation,widely used in the fields of
metallurgy,mechanical,construction,chemical,irrigation works,mediat treatment.

Detailed Photos

 

1. screw rod

2. nut bolt

3. cover

4.Skeleton oil seal

5.Bearing

6.Worm gear

7.Oil filling hole

8.Case

9.Skeleton oil seal

10.Cover

11. nut bolt

12.Bearing

13.Skeleton oil seal

14.Bearing

15.worm

16.Flat key

17.Bearing

18.Skeleton oil seal

19.Cover

20.Nut bolt

Product Description

 

Company Profile

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard or Nonstandard: Nonstandard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car, Power Transmission
Customized Support: OEM, ODM, Obm
Brand Name: Beiji or Customized
Certificate: ISO9001:2008
Structures: Worm Gear and Worm
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|

How do worm wheels contribute to the adaptability and versatility of mechanical systems in different settings?

Worm wheels play a significant role in enhancing the adaptability and versatility of mechanical systems across various settings. Here’s a detailed explanation of how worm wheels contribute to these aspects:

  • Variable Speed Ratios: Worm wheels allow for the transmission of motion between the worm and the wheel with variable speed ratios. By changing the number of teeth on the worm wheel or the pitch diameter of the worm, different speed ratios can be achieved. This flexibility in speed control enables mechanical systems to adapt to different operating conditions, accommodate varying load requirements, and provide the desired output speeds for specific applications.
  • Directional Reversibility: One of the key advantages of worm wheels is their ability to transmit motion in both clockwise and counterclockwise directions. By reversing the direction of the worm’s rotation, the motion can be transmitted in the opposite direction through the worm wheel. This feature contributes to the adaptability of mechanical systems, allowing for bidirectional operation and versatility in various applications where reversible motion is required.
  • Compact Design: Worm wheels offer a compact and space-efficient design due to their high gear ratio capabilities. The worm’s helical shape allows for a large reduction in speed within a relatively small package size. This compact design is advantageous in applications where space is limited or where a high gear reduction is required without occupying excessive space. The compactness of worm wheels enhances the adaptability of mechanical systems in diverse settings, including compact machinery, automotive applications, or tight spaces.
  • High Torque Transmission: Worm wheels are known for their ability to transmit high torque. The sliding action between the worm and the worm wheel creates a large contact area, enabling efficient torque transfer. This high torque transmission capability makes worm wheels suitable for applications requiring high torque output, such as lifting mechanisms, conveyor systems, or heavy-duty machinery. The ability to handle high torque contributes to the versatility and adaptability of mechanical systems in different settings.
  • Mechanical Advantage: Worm wheels provide a mechanical advantage by converting a small rotational input force into a larger rotational output force. This mechanical advantage is a result of the gear ratio between the worm and the worm wheel. It allows mechanical systems to generate higher output forces or torques than what is applied at the input. This feature is valuable in applications where increased force or torque amplification is required, enabling systems to adapt to varying load demands and perform tasks that would otherwise be challenging or impractical.
  • Noise Reduction: Worm wheels are known for their quiet operation due to the sliding contact between the worm and the worm wheel teeth. This sliding action reduces the impact and noise associated with gear meshing compared to other types of gears, such as spur gears or bevel gears. The noise reduction capability of worm wheels makes them suitable for applications where noise control is important, such as in precision equipment, office machinery, or noise-sensitive environments. This contributes to the adaptability of mechanical systems in different settings that require low noise levels.

Overall, worm wheels contribute significantly to the adaptability and versatility of mechanical systems in diverse settings. Their variable speed ratios, directional reversibility, compact design, high torque transmission, mechanical advantage, and noise reduction capabilities enable them to meet specific requirements and perform a wide range of tasks in different applications.

Can you provide insights into the importance of proper installation and alignment of worm wheels?

Proper installation and alignment of worm wheels are crucial for ensuring optimal performance, longevity, and efficiency of the gearing system. Here’s a detailed explanation of their importance:

  • Load Distribution: Proper installation and alignment help in achieving the correct meshing and contact pattern between the worm and the worm wheel. This ensures that the load is distributed evenly across the teeth, minimizing localized stress concentrations. Misalignment or incorrect installation can lead to uneven load distribution, causing premature wear, tooth breakage, and reduced gear life.
  • Reduced Friction and Wear: Correct alignment of the worm wheel is essential for minimizing sliding friction between the worm and the worm wheel. Improper alignment can result in increased friction, leading to higher energy losses, heat generation, and accelerated wear of the gear surfaces. Proper installation and alignment help to reduce friction and wear, improving the efficiency and longevity of the worm wheel system.
  • Backlash and Efficiency: Backlash refers to the clearance between the teeth of the worm and the worm wheel. Proper installation and alignment help in minimizing backlash, ensuring tight and accurate meshing between the gear teeth. Excessive backlash can lead to reduced efficiency, decreased positional accuracy, and increased vibration or noise. By achieving proper alignment, backlash can be controlled within acceptable limits, optimizing the efficiency and performance of the worm wheel system.
  • Stability and Noise: Correct installation and alignment contribute to the stability and smooth operation of the worm wheel system. Misalignment can introduce vibrations, noise, and undesirable oscillations during operation. Proper alignment minimizes these issues, promoting stable and quiet operation. This is particularly important in applications where noise reduction, precision, and smooth motion are critical, such as robotics, machine tools, or motion control systems.
  • Mechanical Integrity: Proper installation and alignment help to maintain the overall mechanical integrity of the worm wheel system. Misalignment or incorrect installation can result in excessive forces, stresses, or deflections within the components, leading to structural failures or reduced system performance. By ensuring proper alignment, the mechanical integrity of the system is preserved, ensuring reliable and safe operation.
  • System Performance: The overall performance of the worm wheel system is directly influenced by proper installation and alignment. Correct alignment ensures accurate transmission of motion, precise positioning, and reliable torque transfer. It helps to achieve the desired speed ratios, torque ratios, and positional accuracy required for the specific application. Proper installation and alignment contribute to the overall efficiency, reliability, and performance of the worm wheel system.

In summary, proper installation and alignment of worm wheels are vital for achieving optimal performance, longevity, and efficiency of the gearing system. They help to distribute the load evenly, reduce friction and wear, minimize backlash, promote stability and smooth operation, preserve mechanical integrity, and ensure desired system performance. Adhering to recommended installation procedures and alignment tolerances is crucial to maximize the benefits and capabilities of worm wheel systems.

How does the design of worm wheels impact their performance in different environments?

The design of worm wheels plays a significant role in determining their performance in different environments. Here’s a detailed explanation of how the design of worm wheels impacts their performance:

  • Tooth Profile: The tooth profile of a worm wheel can significantly affect its performance. Different tooth profiles, such as involute, cycloidal, or modified profiles, offer varying characteristics in terms of contact area, load distribution, and efficiency. The selection of the appropriate tooth profile depends on factors such as the application requirements, load capacity, and desired efficiency. For example, in applications where high load capacity is crucial, a modified tooth profile may be preferred to enhance the gear’s strength and durability.
  • Material Selection: The choice of material for worm wheels is crucial for their performance in different environments. Worm wheels can be made from various materials, including steel, bronze, brass, or specialized alloys. Each material offers different properties such as strength, wear resistance, corrosion resistance, and self-lubrication. The selection of the appropriate material depends on factors such as the operating conditions, anticipated loads, and environmental factors. For example, in applications where corrosion resistance is essential, a stainless steel or corrosion-resistant alloy may be chosen to ensure long-term performance in harsh environments.
  • Lubrication and Sealing: Proper lubrication and sealing are vital for the performance of worm wheels, especially in challenging environments. The design of worm wheels should consider factors such as lubrication requirements, sealing mechanisms, and the ability to prevent contamination ingress. Lubrication ensures smooth operation, reduces friction, and minimizes wear between the worm gear and the worm wheel. Effective sealing prevents the entry of contaminants such as dust, dirt, or moisture, which can adversely affect the gear’s performance and lifespan. The design should incorporate appropriate lubrication and sealing provisions based on the specific environmental conditions.
  • Heat Dissipation: In environments where high temperatures are present, the design of worm wheels should consider heat dissipation mechanisms. Excessive heat can lead to premature wear, reduced efficiency, and potential damage to the gear system. The design may include features such as cooling fins, heat sinks, or ventilation channels to facilitate heat dissipation and maintain optimal operating temperatures. Proper heat dissipation design ensures the longevity and reliability of worm wheels in high-temperature environments.
  • Noise and Vibration Control: The design of worm wheels can incorporate features to control noise and vibration, which are particularly important in certain environments. Modifications to the tooth profile, manufacturing tolerances, or the addition of damping elements can help reduce noise and vibration generation. In noise-sensitive environments or applications where excessive vibration can affect precision or stability, the design should prioritize noise and vibration control measures to ensure smooth and quiet operation.
  • Environmental Factors: The design of worm wheels should consider specific environmental factors that can impact their performance. These factors may include temperature extremes, humidity, corrosive substances, abrasive particles, or even exposure to outdoor elements. The design may incorporate protective coatings, specialized materials, or enhanced sealing mechanisms to mitigate the effects of these environmental factors. Considering and addressing the specific environmental challenges helps ensure optimal performance and longevity of worm wheels in different environments.

By carefully considering the design aspects mentioned above, worm wheels can be tailored to perform reliably and efficiently in different environments. The design choices made for tooth profile, material selection, lubrication, heat dissipation, noise and vibration control, and addressing environmental factors are essential for optimizing the performance and durability of worm wheels in their intended applications.

China high quality Worm Screw Jack Lift Gearbox Gearbox Motor Engine Worm Gear Screw Jack Lifter Swl Mechanical Jack  China high quality Worm Screw Jack Lift Gearbox Gearbox Motor Engine Worm Gear Screw Jack Lifter Swl Mechanical Jack
editor by Dream 2024-04-19

worm wheel

As one of leading worm wheel manufacturers, suppliers and exporters of products, We offer worm wheel and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of worm wheel

Recent Posts