China Professional Worm Gear DC Servo Motor Worm Gear for Servo Motor 12V 350W DC Worm Gear Motor for Rubber Track

Product Description

This is our new product,servo motor,it is used in AGV vehicle,Robot driving system, tracked cars.Motor power up to 200w/500W/800W/1000W/1.5kw(2hp).volt is 48V,speed is 1500r/min.
1.Protection grade:IP65, insulation grade:F 

2.Winding overhang structure optimization, to minimize the copper loss and iron loss minimization, small volume, light weight, low temperature rise, high efficiency
3.Super high coercivity, the maximum magnetic energy product NdFe35 permanent magnetic materials, strong resistance to demagnetization, motor performance is stable.
4.Low noise, low vibration, low moment of inertia.
5.High torque, fast dynamic response, wide speed range, strong overload capacity (four times)

 1.Product Features:

a. Protection grade:IP55, insulation grade:F
b. Winding overhang structure optimization, to minimize the copper loss and iron loss minimization, small volume, light weight, low temperature rise, high efficiency
c. Super high coercivity, the maximum magnetic energy product NdFe35 permanent magnetic materials, strong resistance to demagnetization, motor performance is stable.
d. Low noise, low vibration, low moment of inertia.
e. High torque, fast dynamic response, wide speed range, strong overload capacity (four times)

 

2.Features:

1)High Torque to inertia ratio&up to 15000Nm/kgm²

2)Fast dynamic response *time constant <20ms

3)Wide speed adjusting&feedback up to 1000:1

4)Steady speed precision up to 0.5%

5)High overload,2Mn/30s,3.5N.m/10s

6)Small volume and light

7)Silent,the lowest noise is only 45dB(A)

8)Protected with IP55,Class F insulation

 

3.Industry class:

a. The altitude should be over 1000 CHINAMFG above sea level
b. Environment temperature:-25ºC~+50ºC
c. The month average tallest relative humidity is 90%,at the same the month average lowest temperature is less than 25ºC

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial
Operating Speed: Adjust Speed
Excitation Mode: Excited
Function: Control
Casing Protection: Protection Type
Number of Poles: 10
Customization:
Available

|

What factors should be considered when selecting worm wheels for different applications?

When selecting worm wheels for different applications, several factors need to be considered to ensure optimal performance and compatibility. Here’s a detailed explanation of the factors that should be taken into account:

  • Torque Requirement: The torque requirement of the application is a crucial factor in selecting the appropriate worm wheel. Consider the maximum torque that the worm wheel needs to transmit and ensure that the selected worm wheel has a sufficient torque rating to handle the load without excessive wear or failure.
  • Speed Range: The speed range of the application influences the choice of worm wheel. Different worm wheel configurations are suitable for specific speed ranges. For high-speed applications, it may be necessary to consider factors such as tooth design, materials, and lubrication to minimize friction and wear under increased rotational speeds.
  • Load Capacity: Evaluate the expected load on the worm wheel and ensure that the selected worm wheel can handle the specific load without deformation or excessive wear. Factors such as tooth profile, material selection, and the number of threads in the worm wheel contribute to its load-carrying capacity.
  • Space Constraints: Consider the available space for the installation of the worm wheel. Worm wheels come in various sizes, and it’s essential to choose a size that fits within the designated space without compromising performance or interfering with other components of the system.
  • Operating Conditions: Evaluate the operating conditions such as temperature, humidity, and contamination levels. Some applications may require worm wheels with specific material properties to withstand harsh environments or corrosive substances. Consider factors such as corrosion resistance, temperature tolerance, and the need for additional sealing or protection measures.
  • Efficiency Requirements: The desired efficiency of the system is an important consideration. Different worm wheel configurations and materials have varying levels of efficiency. Evaluate the trade-off between efficiency, cost, and other application requirements to select a worm wheel that provides the desired balance of performance and cost-effectiveness.
  • Maintenance and Lubrication: Consider the maintenance requirements and lubrication needs of the worm wheel. Some worm wheels may require periodic lubrication to ensure smooth operation and minimize wear. Evaluate the accessibility of the worm wheel for lubrication and the frequency of maintenance that the application can accommodate.
  • Compatibility: Ensure that the selected worm wheel is compatible with other components of the system, such as the mating worm gear and any associated power transmission elements. Consider factors such as tooth profiles, pitch, backlash control, and the overall system design to ensure proper meshing, alignment, and efficient power transmission.
  • Cost Considerations: Finally, consider the cost implications of the selected worm wheel. Evaluate factors such as material costs, manufacturing complexity, and any additional features or customization required. Balance the desired performance and quality with the available budget to select a worm wheel that meets both technical and financial requirements.

By carefully considering these factors, it is possible to select the most suitable worm wheel for a specific application, ensuring optimal performance, longevity, and efficient power transmission.

In what industries or applications are worm wheels commonly utilized?

Worm wheels, in conjunction with worm gears, find wide applications across various industries that require precise motion control, high torque, and compact design. Here’s a detailed explanation of the industries and applications where worm wheels are commonly utilized:

1. Automotive Industry: Worm wheels are used in automotive applications, such as power steering systems. They provide the necessary gear reduction to convert the rotational motion from the steering wheel into the appropriate steering force, enabling smooth and responsive steering control.

2. Industrial Machinery: Worm wheels are widely employed in various industrial machinery applications, including machine tools, conveyors, packaging machines, and material handling equipment. They provide reliable and efficient power transmission, enabling precise control of speed and torque in these systems.

3. Elevators: Worm wheels play a vital role in elevator systems, where they are used in the elevator drive mechanism to control the movement of the elevator car. They provide the necessary gear reduction to ensure smooth and controlled vertical motion, along with the ability to hold the car in position when the power is removed.

4. Robotics: Worm wheels are commonly utilized in robotic systems, particularly in robot joints and manipulators. They allow for precise and controlled movement, enabling robots to perform intricate tasks with accuracy and repeatability.

5. Printing Presses: Printing presses often employ worm wheels in their drive systems. The worm gear and worm wheel combination helps in achieving the required gear reduction for controlling the paper feed and maintaining consistent print quality.

6. Conveyor Systems: Worm wheels are found in conveyor systems that require controlled and synchronized movement of goods or materials. They provide the necessary torque and gear reduction to ensure smooth and efficient operation of the conveyor belts or rollers.

7. Agriculture and Farming: Worm wheels are utilized in various agricultural machinery, such as tractor attachments, harvesting equipment, and irrigation systems. They facilitate the transmission of power and control the rotational motion required for specific farming operations.

8. Renewable Energy: Worm wheels are used in renewable energy applications, including wind turbines and solar tracking systems. They help in achieving the required gear reduction to optimize power generation and ensure efficient tracking of the sun or wind direction.

9. Food Processing: Worm wheels are employed in food processing equipment, such as mixers, grinders, and dough kneaders. They provide the necessary gear reduction and enable precise control of rotational speed for efficient food preparation and processing.

10. Medical Equipment: Worm wheels find applications in medical equipment, such as surgical robots, imaging devices, and patient positioning systems. They contribute to precise and controlled movements, enabling accurate medical procedures and patient care.

These are just a few examples of the industries and applications where worm wheels are commonly utilized. Their ability to provide high gear reduction, compact design, and reliable power transmission makes them suitable for a wide range of mechanical systems that require precise motion control and high torque output.

How does the choice of worm wheels affect the overall performance and reliability of gearing systems?

The choice of worm wheels has a significant impact on the overall performance and reliability of gearing systems. Here’s a detailed explanation of how the selection of worm wheels affects these aspects:

  • Material Selection: The choice of material for worm wheels is crucial in determining their performance and reliability. Different materials, such as steel, bronze, or plastic, offer varying levels of strength, durability, and resistance to wear. The selection of the appropriate material should consider factors such as load requirements, operating conditions, and compatibility with other components in the system. Opting for high-quality materials that are suitable for the specific application can enhance the overall performance and reliability of the gearing system.
  • Accuracy and Tolerance: Worm wheels are manufactured with different levels of accuracy and tolerance. Higher precision and tighter tolerances result in improved gear meshing, reduced backlash, and enhanced positional accuracy. The choice of worm wheels with the appropriate accuracy and tolerance level for the application is essential for achieving the desired performance and reliability. In applications where precise motion control, high positional accuracy, or low backlash is critical, selecting worm wheels with superior accuracy can significantly enhance system performance and reliability.
  • Gear Design and Geometry: The design and geometry of worm wheels play a crucial role in determining their performance and reliability. Factors such as tooth profile, helix angle, number of teeth, and tooth surface finish influence the gear meshing characteristics, load distribution, efficiency, and noise levels. Optimal gear design and geometry should be selected based on the specific application requirements and operating conditions. Choosing worm wheels with well-designed gear profiles and appropriate geometric parameters can contribute to smoother operation, efficient power transmission, and improved reliability of the gearing system.
  • Lubrication and Maintenance: The choice of worm wheels can affect the lubrication requirements and maintenance intervals of the gearing system. Some materials or coatings may require specific lubricants or lubrication techniques to ensure proper operation and longevity. Additionally, certain worm wheel designs may have features that facilitate lubricant retention and distribution, improving gear lubrication and reducing wear. Considering the lubrication and maintenance aspects during the selection of worm wheels can enhance the overall performance, efficiency, and reliability of the gearing system.
  • Load Capacity and Efficiency: The load-carrying capacity and efficiency of the gearing system are influenced by the choice of worm wheels. Different worm wheel designs and materials have varying load capacity ratings and efficiency characteristics. Selecting worm wheels that can handle the anticipated loads and provide efficient power transmission helps prevent premature wear, excessive heat generation, and gear failures. Choosing worm wheels with appropriate load capacity and efficiency ratings ensures reliable performance and enhances the overall reliability of the gearing system.
  • Compatibility and System Integration: The choice of worm wheels should consider their compatibility and integration with other components in the gearing system. This includes factors such as shaft sizes, mounting configurations, and interfacing with the worm. Ensuring proper compatibility and integration minimizes alignment issues, reduces stress concentrations, and promotes efficient power transmission. Selecting worm wheels that are specifically designed for compatibility and seamless integration within the system enhances the overall performance, reliability, and longevity of the gearing system.

In summary, the choice of worm wheels significantly impacts the overall performance and reliability of gearing systems. Considerations such as material selection, accuracy and tolerance, gear design and geometry, lubrication and maintenance requirements, load capacity and efficiency, and compatibility with other system components all contribute to the system’s performance and reliability. By carefully selecting worm wheels that meet the specific application requirements and considering these factors, the overall performance and reliability of the gearing system can be optimized.

China Professional Worm Gear DC Servo Motor Worm Gear for Servo Motor 12V 350W DC Worm Gear Motor for Rubber Track  China Professional Worm Gear DC Servo Motor Worm Gear for Servo Motor 12V 350W DC Worm Gear Motor for Rubber Track
editor by Dream 2024-05-09

worm wheel

As one of leading worm wheel manufacturers, suppliers and exporters of products, We offer worm wheel and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of worm wheel

Recent Posts