China Standard Worm Gear, Straight Gear and Bevel Gear for Transmission System

Product Description

1) According to the different strength and performance, we choose the steel with strong compression;
2) Using Germany professional software and our professional engineers to design products with more reasonable size and better performance; 3) We can customize our products according to the needs of our customers,Therefore, the optimal performance of the gear can be exerted under different working conditions;
4) Quality assurance in every step to ensure product quality is controllable.

Product Paramenters

    DRIVEN GEAR

NUMBER OF TEETH

8

MODULE

  9.8718

LENTH

   269

OUTER DIAMETER

ø111

DIRECTION OF SPIRAL

L

ACCURACY OF SPLINE

  M30*1.5-6g

NUMBER OF SPLINE

16

 DRIVEN GEAR

NUMBER OF TEETH

39

OUTER DIAMETER

ø380

DIAMETER OF INNER HOLE

ø244

ACCURACY OF SCREW

  12-M18*1.5-6H

CENTER DISTANCE OF SCREW HOLE

ø290

DIRECTION OF SPIRAL

R

 

Company Profiles

Our company,HangZhou CHINAMFG Gear co.,Ltd , specialized in Hypoid and spiral bevel gear used in Automotive industry, was foundeded in 1996, with registered capital 136,8 square meter, with building area of 72,000 square meters. More than 500 employees work in our company.
 We own more than 560 high-precise machining equipments, 10 Klingelnberg Oerlikon gear production lines, 36 Gleason gear production lines, 5 forging production lines 2 german Aichilin and 5 CHINAMFG CHINAMFG advanced automatic continuous heat treatment production lines. With the introducing the advanced Oerlikon C50 and P65 measuring center, we enhence our technology level and improve our product quality a lot. We offer better quality  and good after-sale service with low price, which insure the good reputation. With the concept of “for the people, by technology, creativity, for the society, transfering friendship, honest”, we are trying to provice the world-top level product.
Our aim is: CHINAMFG Gear,world class, Drive the world.
According to the different strength and performance, we choose the steel with strong compression;Using Germany professional software and our professional engineers to design products with more reasonable size and better performance;We can customize our products according to the needs of our customers,Therefore, the optimal performance of the gear can be exerted under different working conditions;Quality assurance in every step to ensure product quality is controllable.
Our company had full quality management system and had been certified by ISO9001:2000, QS-9000:1998, ISO/TS16949 , which insure the entrance of international market.

Certification & honors

Packaging & Shipping

Packaging Detail:standard package(carton ,wooden pallet).
Shipping:Support Sea freight. Accept FOB,EXW,FAS,DES. 

 

Cooperative customers

HangZhou CHINAMFG Gear Co., Ltd. adheres to the concept of “people-oriented, prosper with science and technology; create high-quality products, contribute to the society; turn friendship, and contribute sincerely”, and will strive to create world automotive axle spiral bevel gear products.


1.Do you provide samples?
Yes,we can offer free sample but not pay the cost of freight.
2.What about OEM?
Yes,we can do OEM according to your requirements.
3.How about after-sales service?
We have excellent after-sales service if you have any quanlity problem,you can contact us anytime.
4.What about package?
Stardard package or customized package as requirements.
5.How to ensure the quanlity of the products?
We can provide raw meterial report,metallographic examination and the accuracy testing etc.
6.How long is your delivery time?
Genarally it is 4-7 days.If customized it will be take 20 days according to your quantity. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Gear Position: External Gear
Manufacturing Method: Cast Gear
Toothed Portion Shape: Herringbone Gear
Material: Cast Steel
Samples:
US$ 90/Set
1 Set(Min.Order)

|

Customization:
Available

|

What are the advantages of using a worm wheel in gearing systems?

Using a worm wheel in gearing systems offers several advantages, making it a popular choice for various applications. Here’s a detailed explanation of the advantages of using a worm wheel:

  • High Gear Reduction: Worm wheels provide significant gear reduction ratios, allowing for large speed reductions and high torque output. The helical shape of the worm gear teeth and the interaction with the worm enable gear ratios ranging from 5:1 to 100:1 or even higher. This makes worm wheels suitable for applications that require high torque and low-speed operation.
  • Compact Design: The perpendicular arrangement of the worm gear and the worm wheel allows for a compact design, making efficient use of space. This is especially beneficial in applications where space is limited or where a compact and lightweight design is desired.
  • Self-Locking: One of the unique properties of a worm wheel system is its inherent self-locking ability. Due to the sliding action and the angle of the helical teeth, the worm wheel can hold its position and prevent backdriving. This means that even when the driving force is removed, the worm wheel remains locked in place, enhancing safety and stability in applications where position holding is critical.
  • High Torque Capability: The sliding action and increased tooth engagement of the worm wheel design allow for a larger contact area between the worm gear and the worm wheel. This results in higher torque transmission capacity compared to other gear types, making worm wheels suitable for applications requiring high torque output.
  • Quiet Operation: The sliding action between the worm gear and the worm wheel results in smoother and quieter operation compared to other gear types. The helical teeth of the worm wheel help distribute the load over multiple teeth, reducing noise and vibration, and providing a smoother transmission of power.
  • Directional Control: Worm wheels offer excellent directional control, allowing power transmission in a single direction only. The self-locking nature of the worm wheel prevents any reverse motion from the output side to the input side. This property is advantageous in applications where precise motion control and prevention of backward movement are required.
  • Efficient Power Transmission: The sliding action, larger contact area, and self-locking nature of the worm wheel design contribute to efficient power transmission. The reduced friction and wear, along with the optimized tooth engagement, help minimize energy losses, improve overall system efficiency, and reduce the need for frequent maintenance.
  • Versatility: Worm wheels can be manufactured in various sizes, materials, and configurations to suit different application requirements. They can be customized to meet specific torque, speed, and space constraints, making them versatile for a wide range of applications across industries.

These advantages make worm wheels suitable for a variety of applications, including automotive, industrial machinery, elevators, robotics, and more. However, it’s important to consider factors such as lubrication, proper gear meshing, and maintenance to ensure the reliable and efficient operation of worm wheel systems.

What maintenance practices are recommended for worm wheels to ensure optimal functionality?

Maintaining worm wheels is crucial for ensuring their optimal functionality and longevity. Here are some recommended maintenance practices for worm wheels:

  • Regular Inspection: Perform regular visual inspections of the worm wheels to check for any signs of wear, damage, or abnormal operating conditions. Look for indications such as pitting, chipping, excessive tooth wear, or misalignment. Early detection of issues allows for timely intervention and prevents further damage.
  • Cleaning: Keep the worm wheels clean from dirt, dust, and debris that may accumulate on the gear surfaces. Use a soft brush or compressed air to remove any contaminants that could potentially affect the gear’s performance or lead to premature wear. Avoid using harsh cleaning agents that may damage the gear material or lubrication.
  • Lubrication: Ensure proper lubrication of the worm wheels according to the manufacturer’s recommendations. Lubrication reduces friction, minimizes wear, and helps dissipate heat. Follow the specified lubrication intervals and use the appropriate lubricant type and viscosity for the specific application. Monitor the lubricant level regularly and replenish or replace it as needed.
  • Alignment and Adjustments: Check the alignment of the worm wheel with the worm gear to ensure proper meshing and load distribution. Misalignment can result in increased wear, reduced efficiency, and potential damage. If misalignment is detected, consult the manufacturer’s guidelines for proper alignment procedures and make necessary adjustments.
  • Torque Monitoring: Periodically monitor the torque levels in the system to ensure they are within the recommended range. Excessive torque can lead to increased wear and potential gear failure. Use appropriate torque monitoring devices or methods to measure and verify that the torque values are within the specified limits.
  • Temperature Monitoring: Keep an eye on the operating temperature of the worm wheels. Excessive heat can indicate issues such as inadequate lubrication, overloading, or misalignment. Monitor the temperature using appropriate temperature measurement devices and take corrective actions if abnormal temperatures are observed.
  • Replacement of Worn Parts: If any components of the worm wheel assembly, such as the gear or bearings, show significant wear or damage that cannot be rectified through maintenance, consider replacing those worn parts. Using worn components can compromise the performance and reliability of the worm wheel system.
  • Training and Documentation: Ensure that maintenance personnel are properly trained on the specific maintenance requirements and procedures for worm wheels. Maintain accurate documentation of maintenance activities, including inspection records, lubrication schedules, and any repairs or replacements performed. This documentation helps track the maintenance history and assists in identifying any recurring issues or trends.

By following these maintenance practices, worm wheels can be kept in optimal condition, ensuring their functionality, reliability, and longevity. Regular inspections, proper cleaning, lubrication, alignment, torque and temperature monitoring, timely replacement of worn parts, and well-documented maintenance activities are essential for the effective maintenance of worm wheels.

How does the design of worm wheels impact their performance in different environments?

The design of worm wheels plays a significant role in determining their performance in different environments. Here’s a detailed explanation of how the design of worm wheels impacts their performance:

  • Tooth Profile: The tooth profile of a worm wheel can significantly affect its performance. Different tooth profiles, such as involute, cycloidal, or modified profiles, offer varying characteristics in terms of contact area, load distribution, and efficiency. The selection of the appropriate tooth profile depends on factors such as the application requirements, load capacity, and desired efficiency. For example, in applications where high load capacity is crucial, a modified tooth profile may be preferred to enhance the gear’s strength and durability.
  • Material Selection: The choice of material for worm wheels is crucial for their performance in different environments. Worm wheels can be made from various materials, including steel, bronze, brass, or specialized alloys. Each material offers different properties such as strength, wear resistance, corrosion resistance, and self-lubrication. The selection of the appropriate material depends on factors such as the operating conditions, anticipated loads, and environmental factors. For example, in applications where corrosion resistance is essential, a stainless steel or corrosion-resistant alloy may be chosen to ensure long-term performance in harsh environments.
  • Lubrication and Sealing: Proper lubrication and sealing are vital for the performance of worm wheels, especially in challenging environments. The design of worm wheels should consider factors such as lubrication requirements, sealing mechanisms, and the ability to prevent contamination ingress. Lubrication ensures smooth operation, reduces friction, and minimizes wear between the worm gear and the worm wheel. Effective sealing prevents the entry of contaminants such as dust, dirt, or moisture, which can adversely affect the gear’s performance and lifespan. The design should incorporate appropriate lubrication and sealing provisions based on the specific environmental conditions.
  • Heat Dissipation: In environments where high temperatures are present, the design of worm wheels should consider heat dissipation mechanisms. Excessive heat can lead to premature wear, reduced efficiency, and potential damage to the gear system. The design may include features such as cooling fins, heat sinks, or ventilation channels to facilitate heat dissipation and maintain optimal operating temperatures. Proper heat dissipation design ensures the longevity and reliability of worm wheels in high-temperature environments.
  • Noise and Vibration Control: The design of worm wheels can incorporate features to control noise and vibration, which are particularly important in certain environments. Modifications to the tooth profile, manufacturing tolerances, or the addition of damping elements can help reduce noise and vibration generation. In noise-sensitive environments or applications where excessive vibration can affect precision or stability, the design should prioritize noise and vibration control measures to ensure smooth and quiet operation.
  • Environmental Factors: The design of worm wheels should consider specific environmental factors that can impact their performance. These factors may include temperature extremes, humidity, corrosive substances, abrasive particles, or even exposure to outdoor elements. The design may incorporate protective coatings, specialized materials, or enhanced sealing mechanisms to mitigate the effects of these environmental factors. Considering and addressing the specific environmental challenges helps ensure optimal performance and longevity of worm wheels in different environments.

By carefully considering the design aspects mentioned above, worm wheels can be tailored to perform reliably and efficiently in different environments. The design choices made for tooth profile, material selection, lubrication, heat dissipation, noise and vibration control, and addressing environmental factors are essential for optimizing the performance and durability of worm wheels in their intended applications.

China Standard Worm Gear, Straight Gear and Bevel Gear for Transmission System  China Standard Worm Gear, Straight Gear and Bevel Gear for Transmission System
editor by CX 2024-04-17

worm wheel

As one of leading worm wheel manufacturers, suppliers and exporters of products, We offer worm wheel and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of worm wheel

Recent Posts