Product Description

Merchandise Description

Principal Features:
1) Made of substantial good quality aluminum alloy, light-weight fat and non-rusting
two) Massive output torque and large radiating effectiveness
3) Easy working and minimal noise, can operate lengthy time in dreadful condition
4) Great-searching physical appearance, durable service existence and tiny volume
five) Appropriate for omnibearing installation
Main Supplies:
one)housing:aluminium alloy ADC12(size 571-090) die cast iron HT200(measurement one hundred ten-150)
2)Worm:20Cr, ZI Involute profile carbonize&quencher heat therapy make equipment surface area hardness up to 56-62 HRC Soon after precision grinding, carburization layer’s thickness between .3-.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-1
Blend Options:
Enter:with input shaft, With square flange,With IEC regular input flange
Output:with torque arm, output flange, one output shaft, double output shaft, plastic cover
Worm reducers are offered with diffferent mixtures: NMRV+NMRV, NMRV+NRV, NMRV+Personal computer, NMRV+UDL, NMRV+MOTORS

In depth Images

Product Parameters

Exploded Check out:

GMRV Define Dimension:

Firm Profile

About CZPT Transmission:
We are a professional reducer company found in HangZhou, ZHangZhoug province.
Our major items is  full variety of RV571-one hundred fifty worm reducers , also provided GKM hypoid helical gearbox, GRC inline helical gearbox, Pc units, UDL Variators and AC Motors, G3 helical equipment motor.
Items are commonly employed for purposes such as: foodstuffs, ceramics, packing, chemical compounds, pharmacy, plastics, paper-creating, design machinery, metallurgic mine, environmental protection engineering, and all sorts of computerized lines, and assembly strains.
With fast supply, outstanding right after-sales services, innovative producing facility, our merchandise sell well  both at home and overseas. We have exported our reducers to Southeast Asia, Eastern Europe and the Middle East and so on.Our aim is to develop and innovate on the basis of substantial quality, and develop a good reputation for reducers.
Workshop:

Exhibitions:
We take part Germany Hannver Exhibition-ZheJiang PTC Truthful-Turkey Acquire Eurasia

Packaging & Shipping

  Packing details:Plastic Luggage+Cartons+Wood Instances , or on request

Set up Directions

To set up the reducer, it is required to note the subsequent concerns:
one)Verify the right rotation route of output shaft just before fitting reducer to devices.
two)Just before mounting, pls verify shaft diameter, bore diameter, essential and keyway, to be certain their dimension are not deviation In get to hold very good efficiency, also pls keep away from assembling as well tight or too unfastened. 
3)Reducer have to be mounted to devices stably to stay away from vibration.
four)Each time achievable,defend the reducer in opposition to photo voltaic radiation and poor temperature.
five)In the case of especially prolonged interval of storage(4-6 months), if the oil seal is not immersed in lubricant inside the device, it is suggested to modify it considering that the rubber could adhere to the shaft or may even have misplaced the elasticity.
six)Painting need to undoubtedly not go above rubber elements and the holes on breather plug if any.
7)When link with hollow or sound shaft, pls grease the joint to steer clear of lock or oxidation.
eight)Check the right lubricant level via indicator if there is 1.
nine)Beginning must get location steadily, without instantly implementing the greatest load.
ten)When utilizing different of motors to match reducer directly, supporting unit is necessary if motor is also large.
11)Guarantee excellent heat dissipation by maintaining excellent air flow around the motor fan.
12)In the circumstance of ambient temperature40ºC, pls phone the technical division.

Right after Sales Provider

1.Routine maintenance Time and Warranty:Inside of 1 year after acquiring goods.
2.Other Services: Such as modeling choice guide, set up manual, and issue resolution information, etc.

FAQ

1.Q:Can you make as for each buyer drawing?
   A: Yes, we provide personalized service for customers accordingly. We can use customer’s nameplate for gearboxes.
two.Q:What is your terms of payment ?
   A: thirty% deposit prior to generation,balance T/T ahead of shipping and delivery.
3.Q:Are you a trading firm or company?
   A:We are a manufacurer with superior gear and knowledgeable employees.
4.Q:What is actually your production capacity?
   A:8000-9000 PCS/Month
five.Q:Free sample is available or not?
   A:Yes, we can source totally free sample if client concur to pay out for the courier value
six.Q:Do you have any certificate?
   A:Yes, we have CE certification and SGS certificate report.

Make contact with info:
Ms Lingel Pan
For any queries just really feel free of charge ton contact me. Several many thanks for your kind attention to our company!

###

###

###

###

###

###

###

###

###

###

What is a worm gear reducer gearbox?

A worm gear reducer gearbox is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer gearbox can increase the output torque of the engine according to the gear ratio. This type of gear reducer gearbox is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.

Hollow shaft worm gear reducer gearbox

The hollow shaft worm gear reducer gearbox is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducer gearboxes are usually used in combination with helical gear reducer gearboxes. The latter is mounted on the input side of the worm gear reducer gearbox and is a great way to reduce the speed of high output motors. The gear reducer gearbox has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer gearbox. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducer gearboxes can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer gearbox, be sure to choose the correct one according to your requirements.

Double throat worm gear

Worm gear reducer gearboxes use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.

Self-locking function

One of the most prominent features of a worm reducer gearbox is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer gearbox can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducer gearboxes. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer gearbox is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer gearbox is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer gearbox is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer gearbox is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.

Heat generated by worm gears

Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.

Size of worm gear reducer gearbox

Worm gear reducer gearboxes can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer gearbox has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducer gearboxes great for space-saving applications. They also have low initial costs.
Worm gear reducer gearboxes are one of the most popular types of speed reducer gearboxes. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer gearbox depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.

editor by czh 2023-02-02